BSISO22915-11:2011 BSl Standards Publication Industrial trucks Verification of stability Part 11: Industrial variable-reach trucks bsi. ..making excellence a habit' BSISO22915-11:2011 BRITISHSTANDARD National foreword This British Standard is the UK implementation of ISO 22915-11:2011. It supersedes BS ISO 13562-1:2000 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee MHE/7, Industrial trucks. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. @BSI2011 ISBN9780580575891 ICS 53.060 Compliance with a British Standard cannot confer immunityfrom legal obligations. This British Standard was published under the authority of the StandardsPolicyand StrategyCommitteeon30November2011. Amendments issuedsincepublication Date Textaffected BS ISO 22915-11:2011 INTERNATIONAL ISO STANDARD 22915-11 First edition 2011-11-01 IndustrialtrucksVerificationof stability - Part 11: Industrial variable-reach trucks Chariots de manutentionVerification de la stabilite Partie 11:Chariots de manutention a portee variable Reference number ISO 22915-11:2011(E) ISO @ISO2011 BSISO22915-11:2011 ISO22915-11:2011(E) COPYRIGHTPROTECTEDDOCUMENT ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either Iso at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56_. CH-1211 Geneva 20.Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail [email protected] Web www.iso.org Published in Switzerland ii ? ISO 2011 - All rights reserved BSISO22915-11:2011 ISO22915-11:2011(E) Foreword Iso (the International Organization for Standardization)is a worldwidefederation of national standards bodies (IsO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has beer non-governmental,in liaison_withisO,also take part in the work.iso collaborates closely with the InternationalElectrotechnicalCommission(lEC)onallmattersofelectrotechnicalstandardization International Standards are drafted in accordance with the rules given in the ISO/lEC Directives, Part 2 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. isO shall not be held responsible for identifying any or all such patent rights. ISO22915-11waspreparedbyTechnical CommitteeISO/TC110,Industrial trucks,SubcommitteeSC2, Safety of powered industrial trucks. This first edition of iSO 22915-11 cancels and replaces ISO 13562-1:2000, of which it constitutes a technical revision. IsO 22915 consists of the following parts, under the general title Industrial trucks — Verification of stability: Part 1: General Part2:Counterbalanced trucks withmast Part 3: Reach and straddle trucks Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height Part 7: Bidirectional and multidirectional trucks Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated displaced bypowered devices Part 11: Industrial variable-reach trucks Part 13: Rough-terrain trucks with mast Part 14: Rough-terrain variable-reach trucks Part 2o: Additional stability test for trucks operating in the special condition of offset load, offset by utilization Part 21: Order-picking trucks with operator position elevating above 1200 mm Single side-loading trucks, pedestrian-propelled trucks, and lateral- and front-stacking trucks with elevating operatorposition